INSULATION FROM THE OUTSIDE
Insulate the roof
Insulate from the outside. Place SPACE REFLEX between the structure and the roof.
BENEFIT – Creates a barrier against cold, heat and humidity.
INSULATION FROM THE INSIDE
Interior insulation
Insulate from the inside. Fix SPACE REFLEX under the structure, with the advantage of placing a vapour barrier between the insulation and the finish in the same product.
BENEFIT – Efficient and more economical solution.
INSULATION FROM THE INSIDE
Interior insulation
of Industrial Buildings
Insulate from the inside. You can apply our products on Ceilings, Walls and Floors.
Industrial buildings / Light cover / LSF
Recommended products
INSULATION FROM THE INSIDE
Characteristics
FUNCTION / PURPOSE
Thermal balance
Thermal insulation is essential for the thermal balance of the entire building. The function of the SPACE REFLEX® insulation is to prevent the passage of temperature from outside to inside and vice versa.
CHARACTERISTICS PRODUCTS SPACE REFLEX
Ideal insulation
The SPACE REFLEX Reflective insulation is ideal for under-tile insulation, due to its:
> manoeuvrability
> lightness
> adaptability to any surface
> ease of application.
APPLICATION
How do you apply it?
APPLICATION
Necessary tools
The only tools needed are a cutter, aluminium tape and some fixing materials.
STEP BY STEP
Application process
Light roof insulation, whether sheet metal or fiber cement, for industrial buildings, using SPACE REFLEX insulation, is easy to install and is the most suitable technical solution.
01 >The SPACE REFLEX insulation must be applied horizontally over the trusses, placing the sheet or other type of cover afterwards. The second screen should overlap 10 to 15 cm to avoid thermal bridges.
02 >Screws or clamps fasten the insulation and the fixing beam to the sheet or other finishing material and will fix them to all the purlins, respecting the minimum air gap space of 5 cm.
03 >Horizontally, overlapping each strip 5 to 10 cm, sealing this joint with aluminium adhesive tape so that the thermal bridge is sealed, so as not to cause thermal bridges (non-insulated or poorly sealed spaces);
APPLICATION PROCESS
Important considerations
APPLICATION
Advice and tips
> Do not damage the SPACE REFLEX insulation with your feet or any materials.
INSTALLATION OF INVERTED ROOFS
Respect the rules
Reflective insulation, as with any other thermal insulation, must comply with installation standards, so as not to compromise the effectiveness of Space Reflex insulation.
CHARACTERISTICS
Air gaps
You must respect the air gaps in order to obtain the maximum benefit from the reflective effect.
It is important to have air gaps for perfect ventilation of the slab, so the Space Reflex solution (double air gap effect) is ideal for the construction of any roof, thus allowing effective ventilation of the tile and slab.