Insulate from the outside. Place SPACE REFLEX between the structure and the roof.
BENEFIT – Creates a barrier against cold, heat and humidity.
INSULATION FROM THE INSIDE
Interior insulation
Insulate from the inside. Fix SPACE REFLEX under the structure, with the advantage of placing a vapour barrier between the insulation and the finish in the same product.
BENEFIT – Efficient and more economical solution.
Do you have doubts? Contact us.
Wooden construction
Recommended products
More
Characteristics
FUNCTION / PURPOSE
Thermal balance
Thermal insulation is essential for the thermal balance of the entire building. The function of the SPACE REFLEX insulation is to prevent the passage of temperature from outside to inside and vice versa.
CHARACTERISTICS SPACE REFLEX PRODUCTS
Ideal insulation
The SPACE REFLEX Reflective insulation is ideal for under-tile insulation, due to its:
> manoeuvrability
> lightness
> adaptation to any surface
> ease of application.
APPLICATION
How does it apply?
Download
APPLICATION
Necessary tools
The only tools needed are a cutter, aluminium tape and some fixing materials.
STEP BY STEP
APPLICATION PROCESS
The insulation on walls and floors using SPACE REFLEX insulation is easy to install and allows you to save on material, with low waste.
01 >When applying insulation on roofs, the SPACE REFLEX insulation must be applied from the bottom up on a slat by means of a mechanical fastening to the support (liquid nail, steel nail, staples, screws with washers, or other types of fastening) , in the horizontal direction, overlapping each strip 5 to 10 cm, sealing this joint with aluminium adhesive tape so that the thermal bridge is sealed, so as not to cause thermal bridges (uninsulated or poorly sealed spaces). The slat must be placed as the material goes up.
02 > When applied to walls, the SPACE REFLEX insulation is applied by means of mechanical fixing (steel nails, staples, screws with washers, liquid nails, or other types of fixing) to the wall, vertically, on the entire surface, overlapping each strip about 10 cm.
APPLICATION PROCESS
Important considerations
APPLICATION
Advice and tips
> Do not damage the SPACE REFLEX insulation with your feet or any materials.
WOODEN CONSTRUCTION
Respect the rules
Reflective insulation, as with any other thermal insulation, must comply with installation standards, so as not to compromise the effectiveness of Space Reflex insulation.
CHARACTERISTICS
Wooden construction
You must respect the air gaps in order to obtain the maximum benefit from the reflective effect.
It is important to have air gaps for perfect ventilation of the slab, so the Space Reflex solution (double air gap effect) is ideal for the construction of any roof, thus allowing effective ventilation of the tile and slab.