Composition
Reflective insulation composed of one face with protected and reinforced aluminium, one face made of polyethylene plastic and an air bubble inside.
ONE
Multipurpose reflective thermal insulation for FLOORS, THERMAL BRIDGES, PILLARS, PACKAGING, etc.
With protected aluminium.
ONE
- 48m x 1,25m
- 60m²
- 48 cm
ONE R10
- 8m x 1,25m
- 10m²
- 19 cm
Quick info
Benefits
- Faster application: 1,25m high, with 1,20m of performance after overlaps Radon gas barrier
- More energy efficient buildings and houses
- High insulation power in conduction, radiation and convection
- Adds sound insulation for impact noises
- Quick and easy to install
- Impermeable to water
- Does not promote the breeding of insects or rodents
- The product acts as an air chamber
Technical Data
- Thickness: 4 mm
- Thermal Conductivity: 0,040 (W/m.K)
- Reflection Coefficient: 75 to 77%
- Emissivity: 23 to 25%
- Resistance to Compression (50% Deformation): 5,58 ± 0,34 (N/mm²)
- Tear Resistance (Aluminium Side): 177,22 ± 6,67 (N/mm)
- Fire Rating (Aluminium Side): M1
- Fire Rating (Composite Product):Euroclasse E
- Thermal Resistance (R): 1,05 (m²k/w)
- Water Vapour Permeability: б ≤ 0,079×10-3 (mg / h.m.Pa)
- Usage Temperature: -25º to 80º (ºC)
- Hazardous Substances: Does not contain
- Radon Gas Barrier: Yes
Application Areas
- Underfloor heating
- Floors
- Pillars
- Correction of Thermal Bridges
- Packaging (Thermal Boxes, Containers)
- Reinforcement of existing insulation
- Additional waterproofing
Thermal Equivalence
- Rock Wool 40mm
- Glass Wool 45mm
- Expanded Polystyrene (EPS) 40mm
- Extruded Polystyrene (XPS) 40mm
- Expanded Cork 40mm
